Opticlimate Pro 3

If you are looking for an Opticlimate Pro 3 Split Manual, then you’ve come to the right place. This manual will walk you through the installation of this system. Although the system is relatively easy to install, it is recommended that you seek the help of a professional if you don’t have any plumbing or electrical experience. If you do have a bit of experience in installing HVAC systems, you should not have any problem installing this unit on your own.

Three sensors take readings from the grow area – a temperature probe, a humidistat and a light sensor (which is built into the humidistat). The information is gathered by the opticlimate on-board computer and used to make changes, so that the air that’s expelled from the system always matches the specifications programmed into the controller.

The controller itself has a clear display and is very easy to use – comprehensive instructions are included in the manual. You can input ideal temperature and humidity levels for both day and night cycles and the light sensor will make sure that the Opticlimate switches to the correct settings automatically, though you can program the timings manually if required. Either way, the Opti has it covered!

Opticlimate Pro 3 Split Manual

The Opticlimate Pro 3 Split is not limited to grow rooms. It can also be placed outside. Depending on where you plan to place it, you can connect it to 12 inch ducting. However, you should make sure that you keep the length of the ducting short or else it will decrease the efficiency level. If you want to place the system outside of your tent or grow room, you can use 12 inch ducting and install a plenum box or flange.

To install this system, you need a cold water supply. The unit consumes 5 to 9 litres of water per minute. Make sure you have the correct pipe and fittings before installing the system. Installation is easy if you have the necessary tools and have the skills to do it. If you have any experience with DIY projects, you can use the Opticlimate Pro 3 Split Manual to help you. You’ll also need a plumber’s license.

Opticlimate air conditioning system allows you to set humidity and temperature ranges for plants. The unit is easy to install and uses a single water supply. With the addition of a cylinder-shaped carbon filter, you can create a regulated atmosphere for your plants. The Opticlimate also reduces the noise of fans. With an adjustable temperature range from seventy percent to eleven0%, it’s a fantastic climate control system.