CVA Recommend For Muzzleloaders

There are a few different types of primers available for muzzleloaders. Typically, CVA will recommend a primer with a large cap. This type of primer is generally used with very fine granulation black powder. These primers can be used in both inline and side-lock muzzleloaders.

While 209 primers are compatible with 209 muzzleloader ignitions, they do have a higher flashpoint than standard 209 primers. A 209 muzzleloader’s flashpoint is generally around 4500 degrees, making 209 primers too hot for some powders. However, many shooters prefer the higher-temperature primers for ML.

Some shooters recommend using Federal 209A primers for 209 muzzleloader use. They produce the hottest results. However, many shotgunners are not familiar with 209 primers and may be using outdated primers. Do they provide reliable powder ignition at optimum sensitivity?

Cheddite 209 Shotshell Primers

Cheddite primers are a multi-purpose 209 powder primer that is widely used by shooters. They are non-corrosive and provide reliable powder ignition in all shooting conditions. They have a high degree of consistency and are continuously tested for sensitivity in the most adverse conditions. They are also very durable and can withstand high temperatures and humidity levels.

What Primer Does CVA Recommend For Muzzleloaders?

Another great benefit of Cheddite primers is that they provide regular powder ignition. They can ignite any type of powder, including progressive and inactive powders. They also allow the shooter to use a smaller amount of powder with perfect ballistic results. Moreover, these primers do not contain mercury-based compounds, making them a safe choice.

Proper priming technique is critical for reliable powder ignition. It is vital to seat the primer properly and not over-crush it into the primer pocket. Too much compression may cause the primer to move forward during impact.

If you’re looking for a muzzleloader primer, Cheddite 209 is a better choice than Shockey’s Gold. Both powders have good results for muzzleloaders, but one has some advantages over the other. First of all, Cheddite primers have smaller diameters, which is better for muzzleloaders. Second, the primers must fit into the breech plug. Third, Cheddite primers are less hydroscopic than Shockey’s Gold, which means they can blow back under load.

The problem of reenactment muzzleloaders can be solved with a hotter 209 primer. Furthermore, muzzleloaders can use Blackhorn compatible style breech plugs, which move the powder closer to the primer, making it easier to ignite the powder.

However, it is important to note that a #10 muzzleloader primer produces the smallest flame of all muzzleloader primers. As such, it is best used with fine granulation black powder. It is primarily used with percussion-cap revolvers, but can also be used in side-lock and in-line muzzleloaders.